3
$645.90

Are Conversion Kits Legal? In Most Cases, Yes

Good news: yes. A pistol conversion kit like the CAA Gear Up MCK Micro Conversion Kit is generally treated as an accessory under federal law. Putting your handgun in a kit does not, on its own, make it a rifle or an NFA firearm, and you get better accuracy, a steadier hold and room for all your gear.

Here is what the federal rules actually say, in plain language, so you can pick your kit and get to the range.

Turn your handgun into a steadier, smarter platform

A conversion kit wraps your complete handgun in a lightweight frame with a charging handle, rails for lights and optics, and a forward grip area, while your pistol's own serialized frame stays inside. CAA Gear Up offers kits for dozens of models, from the MCK EVO to the MCK 2.0.

Find the right fit on our Conversion Kits by Handgun page, including Glock conversion kits, Sig Sauer conversion kits and Smith & Wesson conversion kits.

Pistol installed in a CAA conversion kit chassis on a workbench in warm shop light

The kit itself is generally just an accessory

The regulated part of a handgun is its frame, and in a typical kit that is still your pistol's own serialized frame. That is why most conversion kits are sold and shipped as accessories. Federal regulations define a pistol as a firearm designed to be fired with one hand, with a grip below the bore (27 CFR § 478.11 (definition of "pistol")[4]).

Two CAA MCK EVO conversion kits, one black and one tan, laid out on a brown canvas background

Set up as a pistol, it stays a pistol

A short-barreled rifle is a weapon designed to be fired from the shoulder with a barrel under 16 inches (26 U.S.C. § 5845 (NFA definitions)[2]; 18 U.S.C. § 921 (GCA definitions)[3]). Run your kit without a shoulder stock and your handgun is still a pistol under those definitions.

Prefer a stock? Register the build as an SBR and wait for ATF approval before you assemble it (ATF: National Firearms Act overview[1]), or install a 16-inch barrel before the stock goes on (United States v. Thompson/Center Arms Co., 504 U.S. 505 (1992)[5]). For pistol builds, skip the vertical foregrip; ATF has long taken the view it can change a pistol's NFA classification.

Pick your build, follow the rules, and a conversion kit turns the pistol you already own into a steadier, more capable platform.

CAA Gear Up

Braces are back on the table

ATF's 2023 brace rule was vacated nationwide by a federal court in June 2024 (ATF notice on the vacated stabilizing brace rule (2021R-08F)[6]), and in May 2026 ATF proposed deleting its language entirely (Federal Register, May 6, 2026: proposed rule removing the brace factoring criteria[7]). Give ATF's current guidance a quick check before you add a brace.

Most states welcome a pistol-configured kit

Most states add nothing beyond federal law for a kit set up as a pistol. A handful, such as California, New York, New Jersey, Massachusetts, Illinois, Maryland, Connecticut, Washington, Colorado and Hawaii, regulate specific features more closely. Even there, many owners can choose a compliant build, so check your state's details before you assemble.

Where states differ, it usually comes down to four things: which features are restricted, how many rounds a magazine may hold, whether a permit or registration is needed, and how the state defines terms like "pistol" or "assault weapon." Many states also block cities from writing their own gun rules, though a few allow local ordinances on top.

In practice, a CAA kit can install as-is in most places and may simply call for a 10-round magazine or a feature change in a stricter state. Your configuration, not the product name, is what a state law looks at.

Close-up of the CAA MCK EVO conversion kit's top Picatinny rail and rear sight

Four easy rules to follow

  1. Choose the kit made for your exact handgun.
  2. For a pistol build, leave off the shoulder stock and vertical foregrip.
  3. Adding a stock? Get ATF approval first, or use a 16-inch barrel.
  4. Confirm your state and local rules.

Then finish your build with conversion kit accessories, sights and flashlight and laser mounts.

Before you check out: Double-check your handgun's make, model and generation, because every kit is built around a specific frame. A conversion kit is not a firearm, so in most cases it comes right to your home without a dealer transfer; a few items or destinations may be restricted. Thinking about a 16-inch rifle build later? Barrel length is taken with the action closed, breech face to muzzle. Not sure which kit fits your gun? Reach out and we will point you to the right one.

Traveling with your conversion kit

Good news for road-trippers: a federal safe-passage law protects you while you drive through states with stricter rules (18 U.S.C. § 926A[8]). If you can legally have your handgun where you start and where you end up, you can pass through other states with it unloaded and locked away from the cabin, in the trunk or, in a vehicle without one, in a locked case that is not the glove box or console.

The simplest routine with an MCK or a similar kit: remove the handgun from the kit or case the whole build, unload every magazine, and keep ammo in a separate container. Make your stops short in states with tighter rules, and save the overnight stays for friendlier ground.

Built a registered short-barreled rifle? Then file ATF Form 5320.20 and get approval before you carry it into another state, as 18 U.S.C. § 922(a)(4) requires[9][10]. A kit kept in pistol form skips that paperwork completely.

Conversion kit legality questions, answered

Yes, in most cases. Under federal law, a pistol conversion kit is generally treated as an accessory, and a kit set up without a shoulder stock keeps your handgun a pistol. Some states restrict certain features, so check your state and local laws.

No, not when it is set up as a pistol without a shoulder stock. Registration and ATF approval are only needed before you attach a shoulder stock to a barrel under 16 inches.

Yes, the legal way. Either register the build as a short-barreled rifle and wait for ATF approval, or install a barrel of at least 16 inches before attaching the stock.

Use an angled grip or handstop instead. ATF has long taken the view that adding a vertical foregrip to a pistol can change its classification under the NFA.

CAA Gear Up ships to most of the country. Availability can vary by product and destination, so check the product page or contact us, and confirm your planned build is legal where you live.

Yes. Under 18 U.S.C. § 926A you can pass through other states if the handgun is legal at both ends of your trip, unloaded, and locked away from the cabin. Keep ammo separate and keep stops brief.

Usually not. The kit is an accessory, and your handgun's frame is the part the law regulates, so most kits ship straight to your door. A few items or destinations may be limited, so check the product page.

Measure with the action closed, from the breech face to the end of the muzzle. Only a permanently attached muzzle device counts toward the 16 inches.

Conversion kit laws by state

Coming soon

Most states keep things simple for a pistol-configured kit. Select your state to learn more about local rules for conversion kits.

Using the map is easy. Each state lights up as a link once its guide is published. Open one and you get a quick answer first, followed by what that state says about features, magazines and local ordinances for a kit build. Your state not live yet? Everything above, from the stock rules to safe-passage travel, applies nationwide in the meantime.

Your next range day starts here

Sources

Important notice: Nothing on this page is legal advice. CAA Gear Up is a retailer, not a law firm, and no one on our team is your attorney. Gun laws are updated regularly at the federal, state and local level, and the same kit can be legal in one build and restricted in another.

You are responsible for knowing and following every law that applies where you live, shoot and travel. Review current federal, state and local rules before you purchase, assemble or modify a conversion kit, and talk with a licensed attorney about your specific situation. By purchasing, the buyer accepts full responsibility for compliance.

Subscribe To Our Newsletter

MADE IN USA
Proudly Designed & Made In USA
FREE SHIPPING
Order above $150 in US
1 YEAR WARRANTY
Quality Guaranteed
No FFL Required
Ships Directly To Your Door

© 2026 RIGHTS RESERVED CAA USA LLC // Meta Tactical LLC // Proudly Designed, Developed & Made in the USA By Plastimold Products LLC

The logos and brand names of third-party companies displayed on this website are trademarks of their respective owners. These companies are not affiliated with us, do not sponsor or endorse our products, and have not authorized the use of their logos. Logos appear solely to identify products with which our items are compatible. For genuine products from those manufacturers, please visit their official websites.

3